Automatic flat plate heat press operating steps

1.Press the "heat" button to energize the heating plate.

2.Press the "Set" key to change the position where the value is set.

3.Press the "+" key to increase the set temperature value.

4.Press the "-" key to reduce the set temperature value.

5.The hot plate starts heating.

6.Press the "Settings" button to enter the setting interface.

7.Press the "+" key to increase the setting value.

8.Press the "-" key to reduce the setting value.

9.Press the "+" key to increase the setting value.

10.Press the "-" key to reduce the setting value.

11.The equipment stops pressurizing after reaching the set pressure.

12.In case of emergency, press the "Stop" button to terminate the pressurization process.

13.The equipment maintains pressure for the set time.

14.After the equipment maintains pressure and accepts it, it will automatically release the pressure.

15.Remove the pressed sample.

After stopping sample preparation, you need to turn off the heating plate.