Meet the manual mechanical tablet press – small, lightweight, oil-leak-proof, and ready for action. Designed for convenience, it easily fits in your glove box, offering a portable solution on the go. With a simple structure and stable upper pressure, it's the perfect match for infrared spectrometers.
Manual mechanical press operating steps
1.Assemble the mold cover and mold bottom and place the mold piece.
2.Load the sample into the mold.
3.Use the mold rod to flatten the sample.
Place the mold into the tablet press.
5.Tighten the oil drain valve stem.
6.Tighten the handle.
7.Press down to desired pressure.
8.The sample is kept under pressure for a period of time.
9.Loosen the knob.
10.Release the pressure.
11.Remove the mold.
12.Separate the mold.
13.Take out the pressed sample.
14.Place the sample on a dedicated sample rack.
15.Open the infrared spectrometer sample compartment.
16.Place the sample into the spectrometer for detection.
In the world of precision, the manual mechanical tablet press reigns supreme. Its straightforward operation—tighten by hand to pressurize, loosen to release—embodies elegance in simplicity. Compact yet powerful, this device proves that size is no barrier to efficiency, making it a standout in the realm of precision instruments.
Related Products
- Manual Lab Heat Press
- Manual Cold Isostatic Pressing Machine CIP Pellet Press
- Single Punch Manual Tablet Press Machine TDP Tablet Punching Machine
- Laboratory Manual Hydraulic Pellet Press for Lab Use
- Manual Heated Hydraulic Press Machine with Heated Plates for Laboratory Hot Press
